Vision Lithium Reports Drill Results From Cadillac Lithium Property- Intersects Up To 3.14% Li2o

2022-04-13 05:45:29

VAL-D’OR, QC, April 13, 2022 /CNW Telbec/ – Vision Lithium Inc. (TSXV: VLI) (OTCQB: ABEPF) (FSE: 1AJ2) (the “Company” or “Vision Lithium“) announces assay results for the first set of drill holes completed on the recently acquired Cadillac Lithium property (the “Property“). The Property comprises a total of 332 claims covering 19,070 hectares (190 km2) located just south of the historic mining town of Cadillac and approximately halfway between the major mining centres of Rouyn-Noranda and Val-d’Or, in the province of Quebec, Canada.

Vision Lithium Inc. Logo (CNW Group/Vision Lithium Inc.)

Table 2. Drilling program results










Section

DDH #

Dike

From m

To m

Length m

Li2O %

550E

CAD-22-04

B

31.80

32.40

0.60

1.15

550E

CAD-22-04

B

33.90

34.40

0.50

1.72

550E

CAD-22-04A

B

31.20

32.20

1.00

3.14

400E

CAD-22-07

B

46.70

48.60

1.90

1.74

300E

CAD-22-08

C

124.60

125.77

1.17

0.79

450E

CAD-22-13

C

152.40

158.80

6.40

1.00

Yves Rougerie, President and CEO commented, “The first eleven holes were drilled on the main exposed dike on the property over an initial strike length of 150 m. The drill holes tested the B dike just below an area of surface high grade channel sample results reported in December and January. The B dike varies from 4 to 14 metres in core length and appears to dip at -70 to the South. Spodumene is observed in almost all holes as individual large crystals sparsely distributed throughout the central portion of the dike. This is similar to the observed mineralization on surface. We typically see large crystals in the core resulting  in high grade values such as 3.14% Li2O in hole CAD-22-04A and 1.72% Li2O over 1.90 m in hole CAD-22-07 and 1.00% Li2O over 6.40 m in hole CAD-22-13 in the C dike. I am very encouraged by this first pass of drilling. There are still several holes to be reported and based on what we are seeing we will target deeper mineralization in the next round of drilling where the intersections are wider.”

Along with the previous surface channel sample results, these results indicate the presence of significant lithium values over the known length of the B dike as observed on surface. The Cadillac Lithium property hosts at least 4 known spodumene-bearing pegamtitite dikes which will be tested during the on-going drilling program.

A total of ten additional holes have ben completed to date and are being logged and sampled at this time. Visual results appear similar to the first seven holes, with good continuity of the dike over several hundred metres and spodumene being observed in most holes. The drilling program will continue through the spring ahead of the summer field season where numerous pegmatite targets will be ground proofed.

Table 1. Drilling program statistics















Section

Target Dike(s)

DDH #

UTM
East

UTM
North

Azimuth

Dip

Length
meters

500E

B

CAD-22-01

687469

5329617

30°

-50

108.5

500E

B

CAD-22-02

687455

5329592

30°

-54

81.0

500E

B

CAD-22-03

687455

5329592

30°

-70

99.0

550E

B

CAD-22-04

687508

5329585

30°

-50

48.0

550E

B

CAD-22-04A

687508

5329585

30°

-54

45.0

550E

B

CAD-22-05

687497

5329560

30°

-54

84.0

400E

B-C-D

CAD-22-06

687381

5329666

30°

-50

250.0

400E

B

CAD-22-07

687368

5329641

30°

-54

66.0

300E

B-C

CAD-22-08

687278

5329686

30°

-50°

135.0

300E

B

CAD-22-09

687265

5329662

30°

-54°

67.5

450E

B-C

CAD-22-13

687414

5329613

30°

-54°

168.0

Quality assurance/quality control (QA/QC)

The sampling program and the quality control program were planned and supervised by Yves Rougerie. The quality assurance and control protocol involves the insertion of control or normalized samples on average every 10 samples, in addition to the regular insertion in the process of analysis of sterile, duplicate and standardized samples, accredited by ALS Canada Ltd. Samples were transported from the Cadillac Lithium project to a secure facility in Val-d’Or, Quebec where samples were prepared. The sawed channels samples were bagged, sealed and transported to the facility of ALS Chemex in Val-d’Or, where each sample was dried, crushed and pulped (Prep-31). The samples were crushed to 70 per cent less than two millimetres (CRU-31), riffle split, pulverize split to better than 85 per cent passing 75 microns (PUL-31). Samples were assayed for Lithium + 33 element by  ICP-AES (ME-MS85) and by 4Acid digestion for ore grade lithium samples (Li-OG63).

The scientific and technical information in this release has been reviewed and approved by Yves Rougerie, Geologist, President and CEO of the Company. Mr. Rougerie is a “qualified person” as defined in National Instrument 43-101 – Standards of Disclosure for Mineral Projects. The potential grades of exploration targets disclosed in this news release are conceptual in nature. There has been insufficient exploration to define a mineral resource and it is uncertain if further exploration will result in the target being delineated as a mineral resource.

About Vision Lithium Inc.

Vision Lithium Inc. is a junior exploration company focused on exploring and developing high quality mineral assets including lithium and copper in Canada. The Company is led by skilled and qualified mineral exploration experts and business professionals with a deep understanding of the battery materials market, which is driven by lithium-ion batteries. Vision Lithium is committed to discovering new, world-class assets and bringing these assets to production, starting with the Godslith lithium property located in Manitoba; the Cadillac Lithium property, Decelles lithium, Sirmac lithium property and the Dôme Lemieux porphyry/skarn copper-zinc property, all located in Quebec; its skarn and breccia polymetallic Red Brook and Benjamin properties in Northern New Brunswick and its St. Stephen nickel-copper-cobalt property in Southern New Brunswick.

For further information on the Company, please visit our website at www.visionlithium.com or contact us at This email address is being protected from spambots. You need JavaScript enabled to view it..

NEITHER THE TSXV NOR ITS REGULATION SERVICES PROVIDER (AS THAT TERM IS DEFINED IN THE POLICIES OF THE TSXV) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THIS RELEASE.

CAUTIONARY STATEMENT REGARDING FORWARD-LOOKING INFORMATION: This news release includes certain “forward-looking statements” under applicable Canadian securities legislation. Forward-looking statements include, but are not limited to, statements with respect to: potential mineralization, estimates of cut-off grade, the potential to extend the estimates to other portions of the Property, the Company’s plans for further drilling and exploration, and the long-term prospects of the lithium market. Forward-looking statements are necessarily based upon a number of estimates and assumptions that, while considered reasonable, are subject to known and unknown risks, uncertainties, and other factors which may cause the actual results and future events to differ materially from those expressed or implied by such forward-looking statements. Such risks and other factors include, but are not limited to: the estimates may turn out to be inaccurate; additional drilling and exploration may lead to a determination that there is no potentially viable mine plan for the Property; general business, economic, competitive, political and social uncertainties; delay or failure to receive board, shareholder or regulatory approvals; and the ability of the Company to execute and achieve its business objectives. There can be no assurance that the forward-looking statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements. The Company disclaims any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except as required by law.

Source link

English English German German